An Ultimate Solution of How to Flash Redmi 2 Using Fastboot

How to Flash Redmi 2 using Fastboot – Today ApplicationYak is going to share with you an extensive guide about How to Flash Redmi 2 Using Fastboot. If you are not familiar with the Fastboot and how to flash your Redmi 2 device then we believe that this guide will be very fruitful for you. Until the end of the guide, all the questions in your mind will be cleared.

First of all, let’s explore together what is Fastboot? Then we will talk about how to flash Redmi 2 using Fastboot?

What is the Fastboot?

Fastboot is a kind of Protocol. With the help of the Fastboot, you can re-flashed the partitions of the Android phone to Stock or official ROMS. This you can direct to your smartphone flash memory with the help of this protocol. This tool is present in the Android Software development kit and is used for the recoveries, flashing kernels, bootloaders, induvial ROM or for the whole ROMs.

Download Android Fastboot SPD FRP Reset Tool

Xiaomi consists its own Flashing tool named as “Mi Flash”. This flashing tool works on the Fastboot protocol. The software will provide you a user-friendly Graphical User Interface. User-friendly interface will make the easy configuration and ROM Flashing.

Pre-Requisite of Flashing Redmi 2 Using Fastboot

Here is the pre-requisite list for completing the process of flashing the ROMs for Xiaomi Redmi 2.

  1. Xiaomi Redmi Smartphone.
  2. Fastboot Tool.
  3. USB Cable.
  4. Computer or laptop.
  5. Mi Flash
  6. Extracting Tool.

Important Note Before Moving Ahead

Here are the few steps you must do before flashing the ROMs of Redmi 2 smartphone.

  1. Don’t forget to take the backup of Redmi 2 and save the exact copy in your computer or any other external device like pen drive or flash.
  2. Your device must have more than 50% charge.
  3. When you are transferring the ROM to the other dynamic ROM or developer ROM always perform the clean installation.

Complete Guide to Flash Redmi 2 Using Fastboot

Here are the complete steps which you have to follow properly in order to Flash Redmi 2 using Fastboot. The method is working and tested. If something does not work at your end don’t hesitate to contact us via comments.

Step # 1 – Install Mi-Flash Tool. The tool will ask for the driver installation. At that point click the install driver anyway in order to proceed.

Step # 2 – Now you need to boot Redmi to Fastboot mode by pressing and Hold the following keys. Volume down + Power Button.

Step # 3 – Connect your Redmi 2 to the computer by using the USB Data cable.

Step # 4 – Launch the Mi Flash Tool and click Browse button which is located at the top left corner of the user interface.

Step # 5 – Navigate to the Downloaded folder and here you need to extract the Fastboot ROM.

Step # 6 – Click on advanced and then you need to configure all options carefully.

Step # 7 – Tap on refresh option and now you will have a new device on Mi Flash Tool.

Step # 8 – Click on the Flash option.

Step # 9 – Here you need to wait for some time until the process of flashing is completed.

Step # 10 – Once the process completed successfully the Redmi 2 Smartphone will restart automatically.

How to Flash Redmi 2 using Fastboot

 

How to Flash Redmi 2 using Fastboot 2

 

How to Flash Redmi 2 using Fastboot 3

Congratulations! You have successfully Flashed Xiaomi Redmi 2 Mobile Phone. Thanks for Reading. Here check official link to Download Xiaomi Redmi 2 Flash File and  Download Xiaomi Mobile Firmware Files.

Updated: May 26, 2018 — 2:56 pm






Download Free All Mobile Applications & Games © 2018